Undernet Routing Committee


Application details
Tracking number   1058135633
Applicant email   kreator@srce.hr
Server information
Hostname   bagan2.srce.hr
IP address   161.53.2.81
Administrator name   Dinko Korunic
Administrator email   kreator@srce.hr
Applicant has root   Yes
Admin has physical access   Yes
Server version   ircu2.10.11.04
Maximum users   4000
Operating system   GNU/Linux Debian 3.0, 2.4.20-grsec kernel
Machine type   dual Pentium-III-Tualatin 1.26GHz
uname -a   Linux bagan2 2.4.20-grsec #1 SMP Wed May 7 22:56:35 CEST 2003 i686 unknown
Server memory   2048
File descriptors   16203
 
dmesg output   Linux version 2.4.20-grsec (root@java) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 SMP Wed May 7 22:56:35 CEST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0400 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007fc0000 (usable)
BIOS-e820: 0000000007fc0000 - 0000000007fffc00 (ACPI data)
BIOS-e820: 0000000007fffc00 - 0000000008000000 (ACPI NVS)
BIOS-e820: 0000000008000000 - 0000000080000000 (usable)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
1152MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f65c0
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
hm, page 0009e000 reserved twice.
hm, page 0009f000 reserved twice.
On node 0 totalpages: 524288
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 294912 pages.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: INTEL Product ID: SDS2 APIC at: 0xFEE00000
Processor #1 Pentium(tm) Pro APIC version 17
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
I/O APIC #3 Version 17 at 0xFEC01000.
Processors: 2
Kernel command line: auto BOOT_IMAGE=Linux ro root=801
Initializing CPU#0
Detected 1260.645 MHz processor.
Console: colour VGA 80x25
Calibrating delay loop... 2516.58 BogoMIPS
Memory: 2069216k/2097152k available (1340k kernel code, 27288k reserved, -2036k data, 276k init, 1179648k highmem)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I cache: 16K, L1 D cache: 16K
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU0: Intel(R) Pentium(R) III CPU family 1266MHz stepping 01
per-CPU timeslice cutoff: 91.46 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/0 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 2516.58 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
Intel machine check reporting enabled on CPU#1.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU1: Intel(R) Pentium(R) III CPU family 1266MHz stepping 01
Total of 2 processors activated (5033.16 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
Setting 3 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 3 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 3-3, 3-5, 3-6, 3-7, 3-8, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found pin 0) ...works.
number of MP IRQ sources: 22.
number of IO-APIC #2 registers: 16.
number of IO-APIC #3 registers: 16.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 0 0 0 0 0 1 1 31
01 003 03 0 0 0 0 0 1 1 39
02 000 00 1 0 0 0 0 0 0 00
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 0 0 0 1 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 0 0 0 0 0 1 1 61
08 003 03 0 0 0 0 0 1 1 69
09 003 03 0 0 0 1 0 1 1 71
0a 003 03 0 0 0 1 0 1 1 79
0b 003 03 0 0 0 0 0 1 1 81
0c 003 03 0 0 0 0 0 1 1 89
0d 003 03 0 0 0 0 0 1 1 91
0e 003 03 0 0 0 0 0 1 1 99
0f 003 03 0 0 0 0 0 1 1 A1

IO APIC #3......
.... register #00: 03000000
....... : physical APIC id: 03
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 0E000000
....... : arbitration: 0E
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 1 1 0 1 0 1 1 A9
01 003 03 1 1 0 1 0 1 1 B1
02 003 03 1 1 0 1 0 1 1 B9
03 000 00 1 0 0 0 0 0 0 00
04 003 03 1 1 0 1 0 1 1 C1
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 003 03 1 1 0 1 0 1 1 C9
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:0
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 1:0
IRQ17 -> 1:1
IRQ18 -> 1:2
IRQ20 -> 1:4
IRQ25 -> 1:9
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1260.6150 MHz.
..... host bus clock speed is 132.6963 MHz.
cpu: 0, clocks: 1326963, slice: 442321
CPU0<T0:1326960,T1:884624,D:15,S:442321,C:1326963>
cpu: 1, clocks: 1326963, slice: 442321
CPU1<T0:1326960,T1:442304,D:14,S:442321,C:1326963>
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfd9d1, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Discovered primary peer bus 01 [IRQ]
PCI: Discovered primary peer bus 02 [IRQ]
PCI->APIC IRQ transform: (B0,I2,P0) -> 20
PCI->APIC IRQ transform: (B0,I3,P0) -> 18
PCI->APIC IRQ transform: (B0,I15,P0) -> 33
PCI->APIC IRQ transform: (B0,I15,P0) -> 33
PCI->APIC IRQ transform: (B2,I4,P0) -> 16
PCI->APIC IRQ transform: (B2,I4,P1) -> 17
PCI->APIC IRQ transform: (B2,I8,P0) -> 25
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
apm: BIOS not found.
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
pty: 1024 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ServerWorks CSB5: IDE controller on PCI bus 00 dev 79
ServerWorks CSB5: chipset revision 146
ServerWorks CSB5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2440-0x2447, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2448-0x244f, BIOS settings: hdc:pio, hdd:pio
hda: SONY DVD-ROM DDU1611, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Compaq SMART2 Driver (v 2.4.21)
Compaq CISS Driver (v 2.4.5)
Intel(R) PRO/100 Network Driver - version 2.1.24-k1
Copyright (c) 2002 Intel Corporation

e100: selftest OK.
e100: eth0: Intel(R) 8255x-based Ethernet Adapter
Mem:0xf4021000 IRQ:18 Speed:0 Mbps Dx:N/A
Hardware receive checksums enabled
cpu cycle saver enabled

SCSI subsystem driver Revision: 1.00
Red Hat/Adaptec aacraid driver, May 7 2003
AAC0: kernel 4.0.4 build 5770
AAC0: monitor 4.0.4 build 5770
AAC0: bios 4.0.0 build 5770
AAC0: serial 0b740fd
aacraid: NMI ISR: NMI_PRIMARY_ATU_ERROR
scsi0 : aacraid
Vendor: ADAPTEC Model: Adaptec Mirror Rev: V1.0
Type: Direct-Access ANSI SCSI revision: 02
Vendor: ADAPTEC Model: Adaptec Mirror Rev: V1.0
Type: Direct-Access ANSI SCSI revision: 02
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs

blk: queue c28a2e18, I/O limit 4095Mb (mask 0xffffffff)
Vendor: SONY Model: SDT-10000 Rev: 0110
Type: Sequential-Access ANSI SCSI revision: 02
blk: queue c28a2a18, I/O limit 4095Mb (mask 0xffffffff)
scsi3 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SONY Model: DVD-ROM DDU1611 Rev: GYS1
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi removable disk sdb at scsi0, channel 0, id 1, lun 0
SCSI device sda: 35739904 512-byte hdwr sectors (18299 MB)
sda: Write Protect is off
Partition check:
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
SCSI device sdb: 143357184 512-byte hdwr sectors (73399 MB)
sdb: Write Protect is off
sdb: sdb1 sdb2
md: raid1 personality registered as nr 3
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 276k freed
grsec: mount proc to /proc by (mount:22749) uid/euid:0/0 gid/egid:0/0, parent (rcS:6395) uid/euid:0/0 gid/egid:0/0
Adding Swap: 996020k swap-space (priority -1)
Adding Swap: 995988k swap-space (priority -2)
grsec: mount /dev/sda1 to / by (mount:11445) uid/euid:0/0 gid/egid:0/0, parent (rcS:6395) uid/euid:0/0 gid/egid:0/0
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
grsec: mount /dev/sda1 to / by (mount:28023) uid/euid:0/0 gid/egid:0/0, parent (rcS:6395) uid/euid:0/0 gid/egid:0/0
ttyS0: LSR safety check engaged!
ttyS0: LSR safety check engaged!
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
grsec: mount devpts to /dev/pts by (mount:27720) uid/euid:0/0 gid/egid:0/0, parent (rcS:15459) uid/euid:0/0 gid/egid:0/0
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
grsec: mount /dev/sda5 to /usr by (mount:26990) uid/euid:0/0 gid/egid:0/0, parent (rcS:26702) uid/euid:0/0 gid/egid:0/0
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
grsec: mount /dev/sda6 to /var by (mount:26990) uid/euid:0/0 gid/egid:0/0, parent (rcS:26702) uid/euid:0/0 gid/egid:0/0
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
grsec: mount /dev/sda7 to /service/irc by (mount:26990) uid/euid:0/0 gid/egid:0/0, parent (rcS:26702) uid/euid:0/0 gid/egid:0/0
e100: eth0 NIC Link is Up 100 Mbps Full duplex
uptime output   00:05:42 up 14 days, 1 min, 2 users, load average: 0.66, 0.60, 0.55
 
Oper list   kre - kreator@srce.hr
Laccc - Laccc@cservice.undernet.org
mbuna - mbuna@undernet.org
 
Uplink description   CARNet (Croatian Academic and Research Network) has 622Mbps link via GEANT and GEANT PoP is located at SRCE where this server is, too.
 
Aggregate bandwidth   622
Autonomous System   AS2108
Undernet name   Zagreb.HR.Eu.Undernet.Org
NOC Information   Ivan Maric, MI7-RIPE, Ivan.Maric@CARNet.hr
 
Previous IRC experience   - CARNet ircadmin since 1997 (main coder, senior comitee member) = irc.carnet.hr
- IRCNet ircadmin = ircnet.hinet.hr (admin)
- main Hybserv developer, contributed number of patches and code to Hybrid 6 and 7
 
Additional comments   The server is now DELINKED








*** Romanian Applications ***


We are no longer accepting applications for servers residing in Romania.

Undernet Routing Committee
r-com@undernet.org


      
Quick Links


Routing Committee
Main Page
Documentation
Member List
Database
Newlinks Application
Check Application Status
Logo Submissions


Undernet
Undernet Homepage
Undernet Help
User-Committee
Undernet Coder Committee
CService


Routing Technology
Avaya
Cisco Systems
Juniper Networks
Zebra
Foundry Networks
Nortel


Internet Routing
French Network Operators Group
RIPE
ARIN
APNIC
RA Routing Registry




Copyright © 2000-2013, Undernet Routing Committee / L. E. Vandervort / Julien B. / All Rights Reserved
Routing Committee Logo designed Linder <linder@jealousy.com>