Undernet Routing Committee


Application details
Tracking number   1202215873
Applicant email   hardy@undernet.org
Server information
Hostname   undernet.underworld.no
IP address   217.168.95.245
Administrator name   Anders Hardangen
Administrator email   hardy@undernet.org
Applicant has root   Yes
Admin has physical access   No
Who has physical access   Mats Olsen
Server version   ircu2.10.12.12
Maximum users   15000
Operating system   Ubuntu 7.10
Machine type   Dual Intel(R) Pentium(R) III CPU family 1400MHz
uname -a   Linux undernet1 2.6.22-14-server #1 SMP Tue Dec 18 08:31:40 UTC 2007 i686 GNU/Linux
Server memory   2048
File descriptors   65000
 
dmesg output   [ 0.000000] Linux version 2.6.22-14-server (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18 08:31:40 UTC 2007 (Ubuntu 2.6.22-14.47-server)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffec340 (usable)
[ 0.000000] BIOS-e820: 000000007ffec340 - 000000007fff0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 0009ddd0
[ 0.000000] Entering add_active_range(0, 0, 524268) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524268
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524268
[ 0.000000] On node 0 totalpages: 524268
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2303 pages used for memmap
[ 0.000000] HighMem zone: 292589 pages, LIFO batch:31
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FDFD0 checksum 0
[ 0.000000] ACPI: RSDP 000FDFD0, 0014 (r0 IBM )
[ 0.000000] ACPI: RSDT 7FFEFF80, 002C (r1 IBM SEREMRLD 1000 IBM 45444F43)
[ 0.000000] ACPI: FACP 7FFEFF00, 0074 (r1 IBM SEREMRLD 1000 IBM 45444F43)
[ 0.000000] ACPI: DSDT 7FFEC340, 3AAC (r1 IBM SEREMRLD 1000 MSFT 100000B)
[ 0.000000] ACPI: FACS 7FFEFE40, 0040
[ 0.000000] ACPI: APIC 7FFEFE80, 005E (r1 IBM SEREMRLD 1000 IBM 45444F43)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4e8
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x03] enabled)
[ 0.000000] Processor #3 6:11 APIC version 17
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:11 APIC version 17
[ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, GSI 0-15
[ 0.000000] ACPI: IOAPIC (id[0x0d] address[0xfec01000] gsi_base[16])
[ 0.000000] IOAPIC[1]: apic_id 13, version 17, address 0xfec01000, GSI 16-31
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 3 global_irq 30 dfl dfl)
[ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
[ 0.000000] Built 1 zonelists. Total pages: 520173
[ 0.000000] Kernel command line: root=/dev/md2 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] mapped IOAPIC to ffffb000 (fec01000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1396.131 MHz processor.
[ 77.370688] Console: colour VGA 80x25
[ 77.371906] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 77.373788] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 77.557168] Memory: 2067668k/2097072k available (2047k kernel code, 28028k reserved, 920k data, 364k init, 1179568k highmem)
[ 77.557187] virtual kernel memory layout:
[ 77.557189] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 77.557191] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 77.557193] vmalloc : 0xf8800000 - 0xffbfe000 ( 115 MB)
[ 77.557195] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 77.557197] .init : 0xc03eb000 - 0xc0446000 ( 364 kB)
[ 77.557200] .data : 0xc02ffd16 - 0xc03e5f04 ( 920 kB)
[ 77.557202] .text : 0xc0100000 - 0xc02ffd16 (2047 kB)
[ 77.557207] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 77.557316] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 77.707246] Calibrating delay using timer specific routine.. 2793.16 BogoMIPS (lpj=13965805)
[ 77.707320] Security Framework v1.0.0 initialized
[ 77.707353] SELinux: Disabled at boot.
[ 77.707387] Mount-cache hash table entries: 512
[ 77.707724] CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 77.707750] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 77.707755] CPU: L2 cache: 512K
[ 77.707761] CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
[ 77.707780] Compat vDSO mapped to ffffe000.
[ 77.707811] Checking 'hlt' instruction... OK.
[ 77.747373] SMP alternatives: switching to UP code
[ 77.748124] Early unpacking initramfs... done
[ 78.167553] ACPI: Core revision 20070126
[ 78.167695] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 78.170125] CPU0: Intel(R) Pentium(R) III CPU family 1400MHz stepping 01
[ 78.170163] SMP alternatives: switching to SMP code
[ 78.170383] Booting processor 1/0 eip 3000
[ 78.180683] Initializing CPU#1
[ 78.326820] Calibrating delay using timer specific routine.. 2792.08 BogoMIPS (lpj=13960412)
[ 78.326832] CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 78.326845] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 78.326848] CPU: L2 cache: 512K
[ 78.326853] CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
[ 78.327266] CPU1: Intel(R) Pentium(R) III CPU family 1400MHz stepping 01
[ 78.327304] Total of 2 processors activated (5585.24 BogoMIPS).
[ 78.327563] ENABLING IO-APIC IRQs
[ 78.327771] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 78.546884] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 78.566913] Brought up 2 CPUs
[ 78.902725] migration_cost=1990
[ 78.903001] Booting paravirtualized kernel on bare hardware
[ 78.903116] Time: 14:42:28 Date: 01/05/108
[ 78.903160] NET: Registered protocol family 16
[ 78.903313] EISA bus registered
[ 78.903321] ACPI: bus type pci registered
[ 78.903574] PCI: PCI BIOS revision 2.10 entry at 0xfd61c, last bus=1
[ 78.903579] PCI: Using configuration type 1
[ 78.903582] Setting up standard PCI resources
[ 78.905881] ACPI: EC: Look up EC in DSDT
[ 78.908148] ACPI: Interpreter enabled
[ 78.908154] ACPI: (supports S0 S4 S5)
[ 78.908176] ACPI: Using IOAPIC for interrupt routing
[ 78.912560] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 78.912570] PCI: Probing PCI hardware (bus 00)
[ 78.912652] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 78.912655] * this clock source is slow. If you are sure your timer does not have
[ 78.912658] * this bug, please use "acpi_pm_good" to disable the workaround
[ 78.912687] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 78.912689] * this clock source is slow. If you are sure your timer does not have
[ 78.912692] * this bug, please use "acpi_pm_good" to disable the workaround
[ 78.912768] PCI: Firmware left 0000:00:02.0 e100 interrupts enabled, disabling
[ 78.912824] PCI: Firmware left 0000:00:0a.0 e100 interrupts enabled, disabling
[ 78.912973] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 78.915739] ACPI: PCI Root Bridge [PCI1] (0000:01)
[ 78.915747] PCI: Probing PCI hardware (bus 01)
[ 78.915881] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 78.916595] ACPI: PCI Interrupt Link [LPE1] (IRQs *10)
[ 78.916804] ACPI: PCI Interrupt Link [LPE2] (IRQs *10)
[ 78.916946] ACPI: Blank IRQ resource
[ 78.916949] ACPI: Resource is not an IRQ entry
[ 78.917060] ACPI: PCI Interrupt Link [LPVI] (IRQs) *0, disabled.
[ 78.917266] ACPI: PCI Interrupt Link [LPUS] (IRQs *7)
[ 78.917470] ACPI: PCI Interrupt Link [LPSA] (IRQs *9)
[ 78.917601] ACPI: Blank IRQ resource
[ 78.917604] ACPI: Resource is not an IRQ entry
[ 78.917708] ACPI: PCI Interrupt Link [LP1A] (IRQs) *0, disabled.
[ 78.917839] ACPI: Blank IRQ resource
[ 78.917842] ACPI: Resource is not an IRQ entry
[ 78.917946] ACPI: PCI Interrupt Link [LP1B] (IRQs) *0, disabled.
[ 78.918076] ACPI: Blank IRQ resource
[ 78.918080] ACPI: Resource is not an IRQ entry
[ 78.918182] ACPI: PCI Interrupt Link [LP2A] (IRQs) *0, disabled.
[ 78.918313] ACPI: Blank IRQ resource
[ 78.918317] ACPI: Resource is not an IRQ entry
[ 78.918419] ACPI: PCI Interrupt Link [LP2B] (IRQs) *0, disabled.
[ 78.918525] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 78.918543] pnp: PnP ACPI init
[ 78.918557] ACPI: bus type pnp registered
[ 78.925940] pnp: PnP ACPI: found 14 devices
[ 78.925945] ACPI: ACPI bus type pnp unregistered
[ 78.925952] PnPBIOS: Disabled by ACPI PNP
[ 78.926056] PCI: Using ACPI for IRQ routing
[ 78.926061] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 78.927196] NET: Registered protocol family 8
[ 78.927200] NET: Registered protocol family 20
[ 78.927219] NetLabel: Initializing
[ 78.927222] NetLabel: domain hash size = 128
[ 78.927225] NetLabel: protocols = UNLABELED CIPSOv4
[ 78.927251] NetLabel: unlabeled traffic allowed by default
[ 78.927355] pnp: 00:01: ioport range 0x438-0x439 has been reserved
[ 78.927360] pnp: 00:01: ioport range 0x430-0x437 has been reserved
[ 78.927377] pnp: 00:0c: ioport range 0x600-0x600 has been reserved
[ 78.927382] pnp: 00:0c: ioport range 0xf50-0xf58 has been reserved
[ 78.936440] Time: tsc clocksource has been installed.
[ 78.957929] NET: Registered protocol family 2
[ 79.056439] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 79.056673] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 79.063652] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 79.066124] TCP: Hash tables configured (established 131072 bind 65536)
[ 79.066131] TCP reno registered
[ 79.086678] checking if image is initramfs... it is
[ 79.456311] Switched to high resolution mode on CPU 1
[ 79.466113] Switched to high resolution mode on CPU 0
[ 79.882352] Freeing initrd memory: 6869k freed
[ 79.883215] audit: initializing netlink socket (disabled)
[ 79.883245] audit(1202222547.760:1): initialized
[ 79.883363] highmem bounce pool size: 64 pages
[ 79.887230] VFS: Disk quotas dquot_6.5.1
[ 79.887348] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 79.887574] io scheduler noop registered
[ 79.887579] io scheduler anticipatory registered
[ 79.887583] io scheduler deadline registered (default)
[ 79.887621] io scheduler cfq registered
[ 79.887658] Boot video device is 0000:00:01.0
[ 79.906114] isapnp: Scanning for PnP cards...
[ 80.261919] isapnp: No Plug & Play device found
[ 80.310026] Real Time Clock Driver v1.12ac
[ 80.310207] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 80.310367] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 80.311531] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 80.313089] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 80.313368] input: Macintosh mouse button emulation as /class/input/input0
[ 80.313553] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 80.315455] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 80.315464] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 80.315761] mice: PS/2 mouse device common for all mice
[ 80.315971] EISA: Probing bus 0 at eisa.0
[ 80.316021] EISA: Detected 0 cards.
[ 80.316211] TCP cubic registered
[ 80.316247] NET: Registered protocol family 1
[ 80.316299] Using IPI No-Shortcut mode
[ 80.316577] Magic number: 12:517:737
[ 80.317363] Freeing unused kernel memory: 364k freed
[ 80.572836] Capability LSM initialized
[ 80.616968] md: linear personality registered for level -1
[ 80.624737] md: multipath personality registered for level -4
[ 80.632401] md: raid0 personality registered for level 0
[ 80.640881] md: raid1 personality registered for level 1
[ 80.648048] raid5: automatically using best checksumming function: pIII_sse
[ 80.695320] pIII_sse : 3243.600 MB/sec
[ 80.695323] raid5: using function: pIII_sse (3243.600 MB/sec)
[ 80.865356] raid6: int32x1 418 MB/s
[ 81.035200] raid6: int32x2 510 MB/s
[ 81.205003] raid6: int32x4 384 MB/s
[ 81.374940] raid6: int32x8 353 MB/s
[ 81.544800] raid6: mmxx1 1233 MB/s
[ 81.714694] raid6: mmxx2 1521 MB/s
[ 81.884564] raid6: sse1x1 1062 MB/s
[ 82.054506] raid6: sse1x2 1545 MB/s
[ 82.054510] raid6: using algorithm sse1x2 (1545 MB/s)
[ 82.054515] md: raid6 personality registered for level 6
[ 82.054518] md: raid5 personality registered for level 5
[ 82.054521] md: raid4 personality registered for level 4
[ 82.094561] md: raid10 personality registered for level 10
[ 82.957956] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
[ 82.957965] e100: Copyright(c) 1999-2006 Intel Corporation
[ 82.958067] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 16
[ 82.980659] e100: eth0: e100_probe: addr 0xfeb7f000, irq 16, MAC addr 00:09:6B:58:EA:2F
[ 82.980690] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 25 (level, low) -> IRQ 17
[ 83.003002] e100: eth1: e100_probe: addr 0xfeb7e000, irq 17, MAC addr 00:09:6B:58:EA:30
[ 83.003157] Floppy drive(s): fd0 is 1.44M
[ 83.033722] SCSI subsystem initialized
[ 83.041654] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 28 (level, low) -> IRQ 18
[ 83.052125] FDC 0 is a National Semiconductor PC87306
[ 83.251489] libata version 2.21 loaded.
[ 83.287094] usbcore: registered new interface driver usbfs
[ 83.287183] usbcore: registered new interface driver hub
[ 83.287226] usbcore: registered new device driver usb
[ 83.297224] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 83.297637] ACPI: PCI Interrupt Link [LPUS] enabled at IRQ 7
[ 83.297656] ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LPUS] -> GSI 7 (level, low) -> IRQ 7
[ 83.297689] ohci_hcd 0000:00:0f.2: OHCI Host Controller
[ 83.297942] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
[ 83.297979] ohci_hcd 0000:00:0f.2: irq 7, io mem 0xfeb7d000
[ 83.359880] usb usb1: configuration #1 chosen from 1 choice
[ 83.359931] hub 1-0:1.0: USB hub found
[ 83.359946] hub 1-0:1.0: 2 ports detected
[ 98.244180] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 98.244184] <Adaptec aic7892 Ultra160 SCSI adapter>
[ 98.244186] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 98.244189]
[ 98.245942] scsi 0:0:0:0: Direct-Access COMPAQ BF1468A4CC HPB5 PQ: 0 ANSI: 3
[ 98.245958] scsi0:A:0:0: Tagged Queuing enabled. Depth 8
[ 98.245981] target0:0:0: Beginning Domain Validation
[ 98.249682] target0:0:0: wide asynchronous
[ 98.252455] target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
[ 98.254395] scsi1 : pata_serverworks
[ 98.254516] scsi2 : pata_serverworks
[ 98.254581] ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00010700 irq 14
[ 98.254588] ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x00010708 irq 15
[ 98.259307] target0:0:0: Ending Domain Validation
[ 98.261112] scsi 0:0:1:0: Direct-Access COMPAQ BF1468A4CC HPB5 PQ: 0 ANSI: 3
[ 98.261130] scsi0:A:1:0: Tagged Queuing enabled. Depth 8
[ 98.261150] target0:0:1: Beginning Domain Validation
[ 98.264908] target0:0:1: wide asynchronous
[ 98.267669] target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
[ 98.274160] target0:0:1: Ending Domain Validation
[ 99.556343] scsi 0:0:8:0: Processor IBM FTlV1 S2 0 PQ: 0 ANSI: 2
[ 99.556382] target0:0:8: Beginning Domain Validation
[ 99.556779] target0:0:8: Ending Domain Validation
[ 101.363992] sd 0:0:0:0: [sda] 286749488 512-byte hardware sectors (146816 MB)
[ 101.365508] sd 0:0:0:0: [sda] Write Protect is off
[ 101.365512] sd 0:0:0:0: [sda] Mode Sense: d3 00 10 08
[ 101.367396] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 101.368094] sd 0:0:0:0: [sda] 286749488 512-byte hardware sectors (146816 MB)
[ 101.369563] sd 0:0:0:0: [sda] Write Protect is off
[ 101.369567] sd 0:0:0:0: [sda] Mode Sense: d3 00 10 08
[ 101.371464] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 101.371471] sda: sda1 sda2 sda3 sda4
[ 101.381660] sd 0:0:0:0: [sda] Attached SCSI disk
[ 101.382440] sd 0:0:1:0: [sdb] 286749488 512-byte hardware sectors (146816 MB)
[ 101.383917] sd 0:0:1:0: [sdb] Write Protect is off
[ 101.383922] sd 0:0:1:0: [sdb] Mode Sense: d3 00 10 08
[ 101.385828] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 101.386543] sd 0:0:1:0: [sdb] 286749488 512-byte hardware sectors (146816 MB)
[ 101.388015] sd 0:0:1:0: [sdb] Write Protect is off
[ 101.388019] sd 0:0:1:0: [sdb] Mode Sense: d3 00 10 08
[ 101.389887] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 101.389893] sdb: sdb1 sdb2 sdb3 sdb4
[ 101.398511] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 101.406461] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 101.406524] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 101.406565] scsi 0:0:8:0: Attached scsi generic sg2 type 3
[ 102.116489] md: md0 stopped.
[ 102.209551] md: bind<sda1>
[ 102.209602] md: could not bd_claim sda.
[ 102.209644] md: md_import_device returned -16
[ 102.209857] md: md1 stopped.
[ 102.231575] md: bind<sda3>
[ 102.231796] md: bind<sdb3>
[ 102.246019] raid1: raid set md1 active with 2 out of 2 mirrors
[ 102.247394] md: md2 stopped.
[ 102.319217] md: bind<sda4>
[ 102.319316] md: md0 stopped.
[ 102.319330] md: unbind<sda1>
[ 102.319338] md: export_rdev(sda1)
[ 102.327236] md: bind<sda1>
[ 102.327418] md: bind<sdb1>
[ 102.341675] raid1: raid set md0 active with 2 out of 2 mirrors
[ 102.341825] md: md2 stopped.
[ 102.341838] md: unbind<sda4>
[ 102.341844] md: export_rdev(sda4)
[ 102.351625] md: bind<sda4>
[ 102.375109] md: md2 stopped.
[ 102.375133] md: unbind<sda4>
[ 102.375141] md: export_rdev(sda4)
[ 102.443403] md: bind<sda4>
[ 102.443632] md: bind<sdb4>
[ 102.457892] raid1: raid set md2 active with 2 out of 2 mirrors
[ 102.537427] Attempting manual resume
[ 102.537434] swsusp: Resume From Partition 8:18
[ 102.537437] PM: Checking swsusp image.
[ 102.537660] PM: Resume from disk failed.
[ 102.573475] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 102.573484] EXT3-fs: write access will be enabled during recovery.
[ 103.270966] kjournald starting. Commit interval 5 seconds
[ 103.271000] EXT3-fs: recovery complete.
[ 103.279461] EXT3-fs: mounted filesystem with ordered data mode.
[ 105.189973] e100: eth3: e100_watchdog: link up, 100Mbps, half-duplex
[ 105.289913] e100: eth2: e100_watchdog: link up, 100Mbps, full-duplex
[ 105.648490] NET: Registered protocol family 10
[ 105.648768] lo: Disabled Privacy Extensions
[ 106.468388] piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
[ 106.468404] piix4_smbus 0000:00:0f.0: Host SMBus controller not enabled!
[ 107.044568] input: PC Speaker as /class/input/input1
[ 107.073400] Linux agpgart interface v0.102 (c) Dave Jones
[ 107.076864] agpgart: unable to determine aperture size.
[ 107.076909] agpgart: agp_backend_initialize() failed.
[ 107.076917] agpgart-serverworks: probe of 0000:00:00.0 failed with error -22
[ 107.076931] agpgart: unable to determine aperture size.
[ 107.076966] agpgart: agp_backend_initialize() failed.
[ 107.076971] agpgart-serverworks: probe of 0000:00:00.1 failed with error -22
[ 107.122559] savage4_smbus 0000:00:01.0: Using Savage4 at f8b00000
[ 107.864730] lp: driver loaded but no devices found
[ 107.989846] Adding 96380k swap on /dev/sdb2. Priority:-1 extents:1 across:96380k
[ 107.995558] Adding 96380k swap on /dev/sda2. Priority:-2 extents:1 across:96380k
[ 108.201840] EXT3 FS on md2, internal journal
[ 109.114439] kjournald starting. Commit interval 5 seconds
[ 109.123035] EXT3 FS on md0, internal journal
[ 109.123044] EXT3-fs: mounted filesystem with ordered data mode.
[ 109.130546] kjournald starting. Commit interval 5 seconds
[ 109.134686] EXT3 FS on md1, internal journal
[ 109.134701] EXT3-fs: mounted filesystem with ordered data mode.
[ 115.772991] eth2: no IPv6 routers present
[ 115.972860] eth3: no IPv6 routers present
uptime output   15:45:12 up 2 min, 2 users, load average: 0.10, 0.15, 0.07
 
Oper list   Anders Hardangen / Hardy / hardy@undernet.org

Current Oslo.* and Tampa.* oper. Previous Losangeles.* and Losangeles2.*
admin-rep, current Quakenet and EFnet admin as well as several smaller
networks. Works as a Sr. Engineer with network security.

Mats O
 
Uplink description   2 x 10gbps to Lyse Tele (AS29695)
1 x 1gbps to Banetele Networks (AS3307)
 
Aggregate bandwidth   1024
Autonomous System   AS34087
Undernet name   Trondheim.NO.EU.Undernet.org
NOC Information   Mats S. Olsen, MSO1-RIPE, abuse@nteb.no
 
Previous IRC experience   All of us are experienced irc administrators and work in technical
positions. We would like to host a stable and reliable client server for
undernet`s user base. The server have full support from NTE network
management.
 
Additional comments   The server is now DELINKED








*** POTENTIAL SPONSORSHIP SPAMMER ***


Recently, Undernet has received reports that a non-affiliated person has been sending out requests to large numbers of network & hosting providers asking for sponsorship of resources to link a server to our network.

We do not have full visibility of where all these requests have been sent but understand they likely come from either the name Nikolaos Kostopoulos (GMail) or Alex Koukoulas (admin@underlab.org)
-- both the same individual.

Please be advised that is person is not currently, and never has been, an official representative of Undernet. He is not acting on our behalf and his e-mails has been misrepresenting us and providing misleading & incorrect information.

If you have received one of these requests from him, please let us know at r-com@undernet.org and disregard the request.

We appreciate your help and we apologize if his requests caused any undue hardship.

Undernet Routing Committee
r-com@undernet.org


      
Quick Links


Routing Committee
Main Page
Documentation
Member List
Database
Newlinks Application
Check Application Status
Logo Submissions


Undernet
Undernet Homepage
Undernet Help
User-Committee
Undernet Coder Committee
CService


Routing Technology
Avaya
Cisco Systems
Juniper Networks
Zebra
Foundry Networks
Nortel


Internet Routing
French Network Operators Group
RIPE
ARIN
APNIC
RA Routing Registry




Copyright © 2000-2013, Undernet Routing Committee / L. E. Vandervort / Julien B. / All Rights Reserved
Routing Committee Logo designed Linder <linder@jealousy.com>